How To Install Android Apps On Pc Without Any Software – There are many smartphone users in the world and the fact is that people spend more time with cellphones than PCs. Well, Android smartphones are among the most widely used to rank first. Although hit by many issues, the performance of Android has never been a bit disappointing. Even now Android has been developed to run on computer systems, the development is called the Android-x86 Project.
Currently the Android-x86 Project has given birth to a more stable new OS, specifically for user-friendly desktop computers, the OS is called Phoenix OS. Well, quoted from makeusof site, this time we will explain to you how to install Phoenix OS on PC and Laptop easily. Come on, see the description How To Install the Android On Pc Without Any Software below.
How To Install Android Apps On Pc Without Any Software
Terms Before Installing Android Phoenix OS
1 Hardware Requirements
Phoenix OS requires an x86 processor to run smoothly, whether made by Intel or AMD. But the most recommended is the Intel Atom processor. The following are the minimum hardware requirements needed.
• Minimum 2GB Storage Capacity.
• Intel or AMD processors made in 2012 and above. More recommended Intel Atom processor.
• 8GB USB Flash Drive (For Media Phoenix Boot OS).
• 1GB USB Flash Drive (For GParted)
2. UEFI or Motherboard BIOS?
Old computer systems made in 2010 and below still use the I / O BIOS system as a Power On Self Test (POST). So before the computer enters the operating system, it will first be checked by the BIOS for some hardware components installed, so it is impossible for the operating system to work without the BIOS. However, now the latest computer system replaces the BIOS with a new technology called Unifed Extensible Firmware Interface (UEFI), this technology is claimed to be more reliable and safer than the BIOS.
Unfortunately, Phoenix OS does not support the UEFI system. However, don’t worry because we can configure UEFI to work with a Non-Windows operating system. Come on, keep reading it.
How to Install Phoenix OS
Step 1. Download Phoenix OS
The Phoenix OS installation package is available for 32-bit and 64-bit versions. So that we can install it on old and latest computers as needed. You can download Phoenix OS via the official website as shown above.
Step 2. Make a Bootable USB Phoenix OS to the Flash Drive
After downloading the Phoenix OS installation package, the next step is to make Bootable USB Phoenix OS using the Rufus application. After finishing downloading Rufus, then open the application.
First, select the USB Drive you want to use. Second, select the MBR Partition Scheme for BIOS or UEFI option. Third, select the FAT32 file system. Fourth, you can mark the options for Quick Format, Create a bootable image using, etc. as shown in the picture above. Then finally select the Start button.
Step 3. BIOS / UEFI configuration
There are three things that must be configured in BIOS / UEFI before installing Phoenix OS. Each vendor generally has a different BIOS / UEFI display but its function remains the same. Here are the settings that you can change in BIOS / UEFI.
1. Activate the Legacy Mode Feature if possible.
2. Select the Windows 7 Mode or Linux Mode Feature if available.
3. Turn off the Fast Boot and Secure Boot features if there are, because both features are designed for Windows computers while Phoenix OS is a Linux-based operating system.
If the above settings have been completed, then the last step is that you can change the initial boot mode so that it is directed to the USB Flash Drive that contains the Phoenix OS installation package.
Step 4. Create an Installation Partition (Optional)
There are two types of partitions namely GPT and MBR. On the latest computers usually use the GPT type which is the default partition. Therefore, we must change the partition type from GPT to MBR first. This is also because the type of MBR partition supports all kinds of operating systems.
The first way is to download the GParted application first, after it is finished then make a Bootable USB containing the application. Then change the BIOS’s initial reading to USB Drive and enter the Flash Drive that contains bootable from the Gparted application.
If successful, the image will appear as below.
• Click Device then select Create Partition table.
• After that, select the type of table partition to be selected, just select MSDOS. After that click Apply to end.
Step 5. Preparation for Phoenix OS Installation
The Phoenix OS installation process is very easy. First, enter the installation USB Flash Drive into the computer and select BIOS initial boot from Flash Drive.
• If it appears as shown below, then select Installation.
• After the next menu page appears, select Create / Modify Partitions.
• If you find a question Do you want to use GPT? Just choose No. As we discussed earlier, the operating system Phoenix OS has not yet supported this type of partition.
• If the menu page appears as below, you can use the arrow keys on the keyboard to navigate.
First, scroll to the New option then press enter, this option will create a new partition named sda1. Second, select Primary option to make sda1 the default partition. Third, select sda1 to be the partition used for bootable options. Don’t press enter more than once on the bootable option because it will remove the boot marks on the Flags.
• After completing the above command, the last step is to select the Write option to end and save the settings. If there is a query question Are you sure you want to write the partition table to disk? Then just write the Yes command on the screen and enter to end. When finished, select the Quit button.
Step 6. Install Phoenix OS to the Created Partition
• Select sda1 and press enter.
• On the Choose filesystem menu, select ext4 as the default filesystem.
• If a confirmation screen appears then click Yes to end.
• If the confirmation screen appears to install EFI GRUB2. Then just press the Skip button.
• Then the confirmation question screen will appear. Do you want to install the GRUB boot loader? Just choose Yes. This process is the last and will continue to the installation process.
After the installation process is complete, a page will appear as shown below. You can choose to directly run Phoenix OS by selecting Run Phoenix OS or Rebooting. If you choose Reboot, then don’t forget to revoke the Bootable USB Flash Drive that is still stuck on the computer. FINISHED!
Phoenix OS is an Android Nougat based operating system designed for desktop computers. Phoenix OS also offers a Snap feature that allows users to shift the window to the left or right of the screen. With the Snap feature, it allows Phoenix OS to function in dual-windows mode (Split screen). Wow, cool!
How are you guys, are you interested in installing Phoenix OS on your PC or Laptop device? If you have questions, please write your opinion through the comments column below. Hopefully the information How To Install Android Apps On Pc Without Any Software can be useful. Good luck!